A pay band for a skilled-trades role is a defined pay range with a minimum, a midpoint and a maximum. Contractors anchor the midpoint to local market wages and set the spread to reflect experience, licensing and performance. Done well, bands let a contractor make offers quickly, keep current technicians from outgrowing their pay, and adjust for the local labor market without renegotiating every hire.

This guide covers how to structure bands by tier, where to get wage data, how geographic differentials work for HVAC and plumbing, and how often to revisit the numbers.

Petratalent
Set Pay Bands With Market Insight
Petra Talent provides market wage insights for HVAC and plumbing contractors building competitive pay bands for skilled trade roles.

Explore hiring support

TL;DR

  • A band has three numbers: a minimum, a market-anchored midpoint and a maximum. A spread of roughly 80–120% of the midpoint is a common starting point.
  • Group trade roles into tiers such as apprentice, journeyman and master or lead, and anchor each tier to local wage data.
  • Pay varies widely by location, so benchmark with metro-level or state-level Bureau of Labor Statistics (BLS) data, not national averages alone.
  • Review bands at least annually. Review critical roles more often in tight labor markets.
  • Contractors that want market wage input before posting a role can use recruiter wage consulting.

Table of Contents

What a trades pay band contains

A salary band is a structured pay range for a job level. Its three parts are a minimum, a midpoint and a maximum, and the midpoint is the market anchor. The spread around the midpoint gives room for experience and performance. A buffer of 80–120% of the midpoint is typical, and trade-specific guidance suggests a spread of about ±15–25%.

A simple example for a midpoint of $35.00 per hour:

Spread Minimum Midpoint Maximum
±15% $29.75 $35.00 $40.25
±20% $28.00 $35.00 $42.00
±25% $26.25 $35.00 $43.75

The figures are illustrative arithmetic, not a market recommendation. A narrower spread suits roles with a clear scope. A wider spread suits roles where tenure and certifications vary a lot.

Formal structures are common in business generally. A SHRM survey of North American employers found that about 72 percent use formal base salary range structures. That survey dates from 2010, so treat it as evidence of long-standing practice, not a current count.

What a trades pay band contains

Build the tiers first

Bands work best when each one describes a level of responsibility rather than a job title. For HVAC and plumbing, a practical ladder looks like this:

  1. Helper or apprentice. Learning under supervision, often with scheduled step increases tied to hours and exams.
  2. Journeyman or licensed technician. Works independently on service or install calls and holds the required local license.
  3. Lead, senior or master. Runs jobs, mentors others, handles complex diagnostics or code work.
  4. Supervisor, foreman or project manager. Owns schedule, labor and margin on a job or a crew.

In trades, ladders are often built with “stacked” bands, where the minimum of a higher band sits near the midpoint of the band below. That overlap lets a strong journeyman earn more than a new lead without breaking the structure, and it gives every tier a visible next step.

Anchor each band to local market data

The most reliable public source is the BLS Occupational Employment and Wage Statistics (OEWS) program. The May 2025 estimates cover about 830 occupations across the nation, states and roughly 530 metropolitan and nonmetropolitan areas. That makes it usable at the level where contractors actually hire.

Two national reference points from BLS for May 2025:

These are medians across all experience levels, employers and regions. A median is the point where half of workers earn more and half earn less. It is a sensible midpoint for a mid-level band, not for every tier. Guidance for trades employers suggests the 50th to 65th percentile for experienced journeymen, and the 75th percentile or higher for lead techs.

BLS wages cover base pay. Total compensation for technicians often includes overtime, commission, take-home vehicles, tools and benefits, so compare like with like. Our pages on HVAC technician pay and plumber salary benchmarks show how recruiters see total packages.

Geographic pay differentials in HVAC

One national band rarely works. Wages differ sharply by metro area. In BLS data for May 2021, HVAC mean hourly wages were $34.06 in the New York-Newark-Jersey City area and $21.79 in Coeur d’Alene, Idaho. The figures are older, but they show the size of the gap: a difference of more than $12 per hour between two markets for the same occupation.

Three practical ways to handle this:

  1. Separate bands per market. Best for contractors with branches in clearly different labor markets.
  2. A national structure with a geographic multiplier. Set a base band, then apply a percentage for each zone, based on local OEWS data for the occupation.
  3. Market-by-market midpoints inside one tier structure. The tiers and spreads stay the same, and only the midpoint changes by location.

The factors that move local pay are consistent. Labor demand, the availability of qualified workers and cost of living all affect wages. A metro with heavy commercial construction and few licensed techs will pay above its cost-of-living baseline. Pull the local OEWS figure first, then adjust for how scarce your own candidates are.

Set band position by skill and experience

A band tells you the range. Position within it should follow rules the crew can understand:

  • Licenses and certifications. Tie each to a defined step, for example a state journeyman license or EPA 608 certification for HVAC.
  • Scope of work. Service, new construction and commercial controls work often justify different midpoints.
  • Performance. Use measurable items such as callback rates, completed calls and customer reviews.
  • Tenure. Keep it a smaller factor than skill so that raises reward capability.

The compa-ratio helps here. It is employee pay divided by the band midpoint, so 1.0 means pay at midpoint, and values below 0.80 may signal underpayment. Calculate it for every technician once a year. Anyone far below 1.0 who performs well is a retention risk.

Band structure should also match your pay plan. Hourly, flat-rate, commission and hybrid plans change what the band represents. See our guides to HVAC pay plans and plumbing pay plans before you finalize numbers.

How often to review bands

Salary structures should generally be reviewed annually, with some companies reviewing critical jobs twice a year in very competitive markets. In the same SHRM survey, 77 percent of companies reviewed nonexecutive structures annually.

A practical cycle for a contractor:

  1. Refresh OEWS data for your metro areas when BLS publishes new estimates each spring.
  2. Check bands against your own offer acceptance and decline rates, plus exit interviews.
  3. Review the hardest roles to fill, usually licensed service techs and project managers, a second time mid-year.
  4. Recalculate compa-ratios after any adjustment.

Published survey data lags the market. If offers are being declined, the likely cause is that the band is behind current local pay.

Our perspective

Contractors often set pay by matching the last offer they made or the last person who left. That approach produces inconsistent pay inside one crew and slow offers to candidates who have other options.

We recruit only for HVAC and plumbing, so the wage questions we hear are specific: what a licensed service tech earns in one metro, what a lead is worth, what a project manager expects. Our process pairs technical vetting and credential verification with market wage consulting, so a band is tested against real candidates before a role goes live.

Our advice is to build bands by tier, anchor each to local data, and treat the band as the structure for hiring as well as for raises. A clear band shortens the time between a good interview and a signed offer.

David

Get a market read before you post the role

If you are setting a band for a role you need to fill now, Petra Talent can help with market wage consulting alongside role-specific sourcing and technical screening. Our HVAC recruiting services and plumbing recruiting services cover service, construction and technical roles, and our leadership and management search covers supervisors and project managers.

Petratalent

We publish a one-time placement fee of 18%, and the details are on our pricing page. For wider planning, see our skilled trades hiring outlook.

FAQ

What is a good spread for a skilled-trades pay band?

Most guidance puts the spread between 80% and 120% of the midpoint, or roughly ±15–25% in trade-specific advice. Use the narrower end for tightly scoped roles and the wider end for roles where licenses and experience vary a lot.

Should HVAC and plumbing have separate bands?

Yes, in most cases. BLS reports the occupations separately, with different medians, and the licensing, scope and pay plans differ. Build each trade’s tiers on its own local data, then compare them for internal fairness.

Where do I find local wage data for HVAC technicians?

Start with the BLS OEWS tables, which give wage estimates by occupation for states and metropolitan areas. Compare the percentile that matches each tier, then check it against the offers your own candidates are receiving.

How do I treat overtime and commission in a band?

Keep the band to base pay or base hourly rate, and track variable pay separately. That allows a clean comparison with BLS wage data and makes total compensation easier to explain to candidates.

Sources

Related Posts